Intel STL2 Product Guide - Page 22
Adding or Replacing a Processor
![]() |
UPC - 735858140256
View all Intel STL2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Adding or Replacing a Processor If you are adding a second processor to your system, you must first remove the terminator from the secondary processor socket. The second processor must be compatible with the first processor (within one stepping, same voltage, same speed, see the Intel support website for specifics). 1. Observe the safety and ESD precautions at the beginning of this chapter and the additional cautions given here. 2. Remove the side cover (see your system or chassis documentation for instructions). 3. Raise the locking bar on the socket. OM10686 Figure 4. Raise the Locking Bar 4. Aligning the pins of the processor with the socket, insert the processor into the socket. Note what the processor speed is so you can set the jumpers correctly. 22 Intel Server Board STL2 Product Guide
![](/manual_guide/products/intel-stl2-product-guide-4a37794/22.png)