Intel STL2 Product Guide - Page 27

Removing a Processor, Installing or Removing a Terminator - processor heatsink

Get Intel STL2 - Server Board Motherboard PDF manuals and user guides
UPC - 735858140256
View all Intel STL2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Removing a Processor 1. Observe the safety and ESD precautions at the beginning of this chapter and the additional cautions given here. 2. Unplug the heatsink fan. 3. Detach the heatsink clip from the processor socket. See the documentation that shipped with your processor for more detail. 4. Remove the heatsink from the processor. 5. Raise the locking bar on the socket. 6. Remove the processor from the socket. 7. If you removed the processor from the secondary socket and are not replacing it, you must install a terminator in its place. Installing or Removing a Terminator 1. Observe the safety and ESD precautions at the beginning of this chapter and the additional cautions given here. 2. Raise the locking bar on the socket. 3. Aligning the pins of the processor terminator with the socket, insert the terminator into the socket. 4. Lower the locking bar completely. Do these steps in reverse to remove the terminator. Figure 11. Installing a Terminator OM10679 Upgrading 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Upgrading
27
Removing a Processor
1.
Observe the safety and ESD precautions at the beginning of this chapter and the additional
cautions given here.
2.
Unplug the heatsink fan.
3.
Detach the heatsink clip from the processor socket.
See the documentation that shipped with
your processor for more detail.
4.
Remove the heatsink from the processor.
5.
Raise the locking bar on the socket.
6.
Remove the processor from the socket.
7.
If you removed the processor from the secondary socket and are not replacing it, you must
install a terminator in its place.
Installing or Removing a Terminator
1.
Observe the safety and ESD precautions at the beginning of this chapter and the additional
cautions given here.
2.
Raise the locking bar on the socket.
3.
Aligning the pins of the processor terminator with the socket, insert the terminator into the
socket.
4.
Lower the locking bar completely.
Do these steps in reverse to remove the terminator.
OM10679
Figure 11.
Installing a Terminator