Intel STL2 Product Guide - Page 4

Using the System Setup Utility 42 What You Need to Do 42 Running the SSU from the CD 42 Running the SSU Remotely via an Emergency Management Card 43 Starting the SSU ...43 Customizing the SSU 44 Launching a Task ...44 SEL Manager Add-in 45 SDR Manager Add-in 46 FRU Manager Add-in 47 Exiting the SSU...47 FRUSDR Load Utility...48 When to Run the FRUSDR Load Utility 48 What You Need to Do 48 How You Use the FRUSDR Load Utility 48 Upgrading the BIOS ...52 Preparing for the Upgrade 52 Upgrading the BIOS 53 Recovering the BIOS 53 Changing the BIOS Language 54 Using the Firmware Update Utility 55 Running the Firmware Update Utility 55 Using the Adaptec SCSI Utility 55 Running the SCSI Utility 55 4 Solving Problems Resetting the System ...57 Initial System Startup...57 Checklist ...57 Running New Application Software 58 Checklist ...58 After the System Has Been Running Correctly 58 Checklist ...58 More Problem Solving Procedures 59 Preparing the System for Diagnostic Testing 59 Monitoring POST ...59 Verifying Proper Operation of Key System Lights 59 Confirming Loading of the Operating System 59 Specific Problems and Corrective Actions 60 Power Light Does Not Light 60 No Characters Appear on Screen 60 Characters Are Distorted or Incorrect 61 System Cooling Fans Do Not Rotate Properly 61 Diskette Drive Activity Light Does Not Light 62 Hard Disk Drive Activity Light Does Not Light 62 CD-ROM Drive Activity Light Does Not Light 62 Cannot Connect to a Server 62 Problems with Network 63 PCI Installation Tips 63 iv Intel Server Board STL2 Product Guide