Intel STL2 Product Guide - Page 40
System Hardware Menu, Boot Menu, Wake on Event Submenu, Console Redirection Submenu
![]() |
UPC - 735858140256
View all Intel STL2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
System Hardware Menu You can make the following selections on the Server Menu itself. Feature Wake On Event AC-LINK Choices Stay Off Last State Power On Error Log Initialization Press key Console Redirection Description Enters submenu. Sets what happens when AC power is lost and restored. Stay Off means the server will not power up. Last State means the server will power up if it was powered when AC was lost. Power On means the server will always power up when AC is regained. Clears the SEL. Enters submenu. Wake on Event Submenu Feature Wake On LAN† Wake On Ring Choices Disabled Enabled Disabled Enabled Description Enables remote power on via network command. Enables remote power on via serial port. Console Redirection Submenu Feature COM Port Address Baud Rate Flow Control Console Connection Choices Disabled Serial Port 2 (3F8/IRQ4) Serial Port 2 (2F8/IRQ3) 57.6K 19.2k No Flow Control XON/XOFF Direct Via modem Description When enabled, console redirection uses the I/O port specified. All keyboard/mouse and video will be directed to this port. This is designed to be used only under DOS in text mode. When console redirection is enabled, specifies the baud rate to be used. None disallows flow control. XON/XOFF is software-flow control. Sets what the console connection is. Boot Menu Feature Boot Diagnostics Screen Boot Device Priority Hard Drive Removable Devices Device Enabled Disabled Description Enters submenu. Enters submenu. Enters submenu. 40 Intel Server Board STL2 Product Guide
![](/manual_guide/products/intel-stl2-product-guide-4a37794/40.png)