Intel STL2 Product Guide - Page 73
Current Usage, Calculating Power Consumption, The cooling efficiency varies per slot; therefore
UPC - 735858140256
View all Intel STL2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Current Usage NOTE Both processors pull power from +5V. This may limit the number of drives and/or add-in cards you may install. As an overall current usage limitation on the power supply, do not exceed a combined power output of 195 watts for the +5 and +3.3 volt outputs. The PCI slots on the server board are rated at a maximum of 5 amperes per slot. The maximum power allowed for each slot is 20 watts at +5 volts. The average current usage per slot should not exceed 3.0 amperes per slot; that is, 15 watts. The cooling efficiency varies per slot; therefore, ensure that adequate cooling is available in the target slot-especially in an expansion slot drawing more than 2.0 amperes. Calculating Power Consumption The total combined wattage for the system configuration must be less than the output of your power supply. Use the two worksheets in this section to calculate the power used by your server boards. For current and voltage requirements of add-in boards and peripherals, see your vendor documents. Equipment Log and Power Consumption Worksheets 73