Intermec CV61 CV61 Vehicle Mount Computer (Windows 7) User Guide - Page 63
Con WPA or WPA2 Personal PSK Security With Wireless, Security, User Name, Subject Name
View all Intermec CV61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Chapter 4 - Configure the Computer 9 If you choose TLS: a Load a user and root certificate on your computer. For help, see "Load a Certificate" on page 59. b Enter a User Name and Subject Name. c For Validate Server Certificate, choose Yes. Configure WPA or WPA2 Personal (PSK) Security With Wireless Security Use the following procedure to configure WPA-PSK or WPA2-PSK with Wireless security. 1 Make sure the communications and radio parameters on your computer are configured. 2 Make sure Wireless security is selected as your security choice. 3 Start Intermec Settings. 4 Choose Communications > 802.11 Radio > Wireless Security. 5 Select the profile you want to configure. 6 For Association, choose WPA or WPA2. 7 For 8021x, choose None. 8 For Pre-Shared Key, enter the pre-shared key or passphrase. The pre-shared key must be a value of 32 hex pairs preceded by 0x for a total of 66 characters. The value must match the key value on the access point. The passphrase must be from 8 to 63 characters. After you enter a passphrase, the computer internally converts it to a pre-shared key. This value must match the passphrase on the authenticator. 9 Save your settings. CV61 Vehicle Mount Computer (Windows 7) User Guide 51