Intermec CV61 CV61 Vehicle Mount Computer (Windows 7) User Guide - Page 68
Enable WPA or WPA2 Personal PSK Security With Microsoft
View all Intermec CV61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Chapter 4 - Configure the Computer 9 If you choose PEAP or EAP-FAST: a Load a root certificate of the authentication server on your computer. For help, see "Load a Certificate" on page 59. b Tap Settings. The Properties screen appears. c Select Validate server certificate. d Tap the User Credentials tab. e Select Use saved user name and password, and enter a User Name and a Password. When you are finished, type in your password again in Confirm Password. f Tap OK to exit the Properties screen. g Tap OK to save the Microsoft Security settings. 10 If you choose Smart Card or other certificate: a Load a root certificate of the authentication server on your computer. For help, see "Load a Certificate" on page 59. b Tap Settings. The Properties screen appears. c Select Validate server certificate. d Tap OK to exit the Properties screen. e Tap OK to save the Microsoft Security settings. Enable WPA or WPA2 Personal (PSK) Security With Microsoft Use the following procedure to enable WPA-PSK With Microsoft Security. 1 Make sure the communications and radio parameters on your computer are configured. 2 Tap Start > Control Panel. The Control Panel appears. 3 In the View by: drop-down menu, select either Large or Small icons. 4 Tap Network and Sharing Center > Manage Wireless Networks and select the wireless network you want to configure. 56 CV61 Vehicle Mount Computer (Windows 7) User Guide