Intermec CV61 CV61 Vehicle Mount Computer (Windows 7) User Guide - Page 67
Con WPA or WPA2 Enterprise 802.1x Security With, Microsoft
View all Intermec CV61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Chapter 4 - Configure the Computer 3 From the Security Choice list, select Microsoft Security. An alert box appears telling you that you must save your settings and reboot the computer for the new security choice to take effect. 4 Tap Yes. The computer resets and starts with Microsoft Security as the Security Choice. Configure WPA or WPA2 Enterprise (802.1x) Security With Microsoft Use these procedures to set WPA-802.1x security on your computer with Microsoft security. 1 Make sure the communications and radio parameters on your computer are configured. 2 Tap Start > Control Panel. The Control Panel appears. 3 In the View by: drop-down menu, select either Large or Small icons. 4 Tap Network and Sharing Center > Manage Wireless Networks. 5 Select the wireless connection you want to configure and tap the Security tab. 6 For Security type, choose WPA-Enterprise or WPA2-Enterprise and select TKIP or AES. The Encryption type automatically defaults to AES. 7 In the Choose a network authentication method, choose either LEAP, EAP-FAST, PEAP, or Smart Card or other certificate. 8 If you choose LEAP: a Tap Settings. The Properties screen appears. b Enter a User Name and a Password. When you are finished, type in your password again in Confirm Password. c Tap OK to exit the Properties screen. d Tap OK again to save the Microsoft Security Settings. CV61 Vehicle Mount Computer (Windows 7) User Guide 55