Intermec CV61 CV61 Vehicle Mount Computer (Windows 7) User Guide - Page 65
Con Static WEP Security With Wireless Security
View all Intermec CV61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 4 - Configure the Computer 2 Choose Communications > 802.11 Radio > Wireless Security. 3 Select the profile you want to configure. 4 For 8021x, choose LEAP. 5 For Association, choose Open, WPA, WPA2, or Network EAP. Encryption automatically defaults to TKIP if you choose WPA, AES if you choose WPA2, and WEP if you choose Open or Network EAP. 6 For Prompt for Credentials, choose Enter credentials now. 7 Enter a User Name and User Password. 8 Save your settings. Configure Static WEP Security With Wireless Security Use the following procedure to configure static WEP security with Wireless security. Intermec recommends that you use WPA2-PSK instead of WEP if possible. 1 Make sure the communications and radio parameters on your computer are configured. 2 Make sure Wireless Security is selected as your security choice. 3 Start Intermec Settings. 4 Choose Communications > 802.11 Radio > Wireless Security. 5 Select the profile you want to configure. 6 For 8021x choose None. 7 For Association, choose Open. 8 For Encryption, choose WEP. 9 Define a value for the keys you want to use. You can define up to four keys (Key 1 through Key 4). Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes long depending on the capability of the radio. Set a 5-byte value for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must be preceded by 0x and contain 5 or 13 hex pairs. CV61 Vehicle Mount Computer (Windows 7) User Guide 53