Intermec CV61 CV61 Vehicle Mount Computer (Windows 7) User Guide - Page 64
Con x Security With Wireless Security, Validate Server Certificate
View all Intermec CV61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Chapter 4 - Configure the Computer Configure 802.1x Security With Wireless Security Use the following procedure to configure 802.1x-WEP security with Wireless security. Intermec recommends that you use WPA2-802.1x instead of 802.1x-WEP if possible. 1 Make sure the communications and radio parameters on your computer are configured. 2 Make sure Wireless security is selected as your security choice. 3 Start Intermec Settings. 4 Choose Communications > 802.11 Radio > Wireless Security. 5 Select the profile you want to configure. 6 For Association, choose Open. 7 For Encryption, choose WEP. 8 For 8021x, choose TTLS, PEAP, or TLS. 9 If you chose TTLS or PEAP: a Enter a User Name. b For Prompt for Credentials, choose Enter credentials now. c Enter a User Password. d For Validate Server Certificate, choose Yes. 10 If you choose TLS: a Load a user and root certificate on your computer. For help, see "Load a Certificate" on page 59. b For Validate Server Certificate, choose Yes. c Enter a User Name and Subject Name. 11 Save your settings. Configure LEAP Security With Wireless Security After you configure the communications and radio parameters on your computer and select Wireless Security as your security choice, you can configure LEAP. 1 Start Intermec Settings. 52 CV61 Vehicle Mount Computer (Windows 7) User Guide