Intermec CV61 Intermec Terminal Emulator (ITE) User Guide - Page 204
Changing the Size and Alignment of the CV41 or CV61 SIP, SIP Height, SIP Width, SIP Alignment, Center
View all Intermec CV61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Appendix B - Using the Computer Keypad Registry Values for Custom SIPs (continued) Registry Value ExitSIP Description Exits the SIP executable when ITE is being upgraded. If you do not exit the SIP executable at upgrade time, an "EXE in use" error message appears when you try to upgrade ITE. Values 0 = No exit ("EXE in use" error appears.) 1 = Exit (No SIP error message appears when upgrading.) Note: Use ToolbarHeight and IsFullScreen to adjust the SIP position based on the ITE window and toolbar size. To replace the default SIP with your custom SIP, name your new SIP .exe itesip.exe and copy it to C:\program files\intermec\ite on the CV41 or CV61. Changing the Size and Alignment of the CV41 or CV61 SIP You can change the size and screen alignment of the SIP through Intermec Settings. To adjust the CV41 or CV61 SIP size and screen alignment 1 Open the Intermec Terminal Emulation main menu in Intermec Settings. For help, see "To configure ITE directly on the computer" on page 21. 2 Tap SIP Height or SIP Width and enter the new value: • For SIP height, the range is 125 to the maximum height of the work area (in pixels). Default value is 125 (CV41) or 265 (CV61). • For SIP width, the range is 400 to the maximum width of the work area (in pixels). Default value is 400 (CV41) or 1000 (CV61). 3 Tap OK. 4 Tap SIP Alignment and select Center (default), Left, or Right to change the position of the SIP along the bottom edge of the computer screen. 5 Tap OK. 192 Intermec Terminal Emulator (ITE) User Guide