Intermec CV61 Intermec Terminal Emulator (ITE) User Guide - Page 74
UDP Plus - Server Configuration Item Descriptions continued, About the Keyboard Type, Charset
View all Intermec CV61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Chapter 2 - Configuring and Managing ITE UDP Plus - Server Configuration Item Descriptions (continued) Item Disconnect Val Keyboard Type Charset Codepage Printer Address Printer Port Description Values When the ITE client is disconnected from its initial controller, this value sets the number of 10-second intervals that the ITE client waits before it attempts to connect to a secondary controller (if one is defined). 0 to 255. Default is 12 (total of 120 seconds in 12 10-second intervals). Sets the language type for the Default is USB. keyboard. For more information, see "About the Keyboard Type, Charset, and Code Page Options" on page 27. Sets the graphic character set. or 697 more information, see "About the Keyboard Type, Charset, and Code Page Options" on page 27. Selects a display language for the 037 code page. or more information, see "About the Keyboard Type, Charset, and Code Page Options" on page 27. IP address of the network printer. None. You must select Network Print in the Print Device parameter. Port number the ITE uses to communicate with the printer. You must select Network Print in the Print Device parameter. 0 to 65535. Default is 23. 8 Tap an item to select it and make changes. For information on the configuration items, see the next table. After you make changes, tap OK to save your changes, or tap Back to return to the list of UDP configuration items for the server. 62 Intermec Terminal Emulator (ITE) User Guide