Intermec CV61 Intermec Terminal Emulator (ITE) User Guide - Page 51
Additional Decode Settings - price
View all Intermec CV61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter 2 - Configuring and Managing ITE There are additional settings for some symbologies. For more information, see the next section. 5 Change the settings as needed. When you are finished, tap OK to save your changes and return to the Barcode Parms list, or tap Cancel to return to the Barcode Parms list without saving any changes. Additional Decode Settings These additional decode settings are available for some symbologies. Additional Decode Settings Symbology Setting Description Value Code 11 Code 128 Code 39 EAN Int 2of5 Plessey UPC Chk Dig 1 Sets the check digit to 1 digit, positioned between the final data character and the stop character. Enabled or Disabled. Default is Disabled. UCC/EAN Enables or disables UCC/EAN for Code Enabled or Disabled. 128. Default is Disabled. No UCC Type Enables or disables No UCC Type for Enabled or Disabled. Code 128. Default is Disabled. UCC F1 Value Sets the value for UCC F1. 0 to 255. Default is 0. Chk Digit Enables or disables the optional check digit for a higher level of security. The check character is positioned between the final data character and the stop character. Enabled or Disabled. Default is Disabled. Full ASCII Enables or disables Full ASCII Code 39. Enabled or Disabled. Default is Disabled. Add-on 2 Enables or disables add-on 2, an add-on Enabled or Disabled. for EAN 13 often used on newspapers Default is Disabled. and magazines. Add-on 5 Enables or disables EAN 5, an add-on Enabled or Disabled. for EAN 13 often used for the price of Default is Disabled. books together with the ISBN code. Expand 8to13 Decompresses an EAN 8 symbol and Enabled or Disabled. transmits it as an EAN 13 symbol. Default is Disabled. Chk Digit Enables or disables the optional check digit for a higher level of security. The check character is positioned between the final data character and the stop character. Enabled or Disabled. Default is Disabled. MOD10 Chk After a good read, adds a check digit at Enabled or Disabled. the end of the bar code for transmission Default is Disabled. to the host, which validates the transmitted data using the check. Add-on 2 Enables or disables add-on 2, an add-on Enabled or Disabled. for UPC-A often used on newspapers Default is Disabled. and magazines. Add-on 5 Enables or disables UPC 5, an add-on for UPC-A often used for the price of books together with the ISBN code. Enabled or Disabled. Default is Disabled. Intermec Terminal Emulator (ITE) User Guide 39