Intermec SF61B SF61 Cordless Scanner User's Guide - Page 20

Chapter 1 - Introducing the SF61B Cordless Scanner Status Light Note: The following tables show the default behavior of the status light, you can use EasySet to modify this behavior if you wish (Operating settings > Beeps / LEDs). The status light flashes green or red to indicate the status of the scanner and/or battery. Status information is sometimes shown even if the Intermec Ready-to-Work Indicator is on. This way the scanner can communicate more than one type of information at the same time. For example while the blue LED is on to show that there is a Bluetooth connection, the scanner will flash green when you have successfully scanned and transmitted a bar code. Default Status Light Description During Scanner Operation Light State What it Means Green light on for 2 seconds Green light flashes twice The scanner successfully decoded a bar code and sent the data to the host. A configuration bar code was successfully read. Red light comes on Transmission error for 2 seconds or Configuration bar code was not accepted Red blinking slow Battery power is low (< 20% - need to charge). Red continuously on NVM (non-volatile memory) problem. and 6 fast beeps every 2 seconds Default Status Light Description When the Scanner is Docked in a Charger Light State What it Means Red continuously on The battery is not fully charged and is charging. Green continuously The battery is fully charged. on 10 SF61 Cordless Scanner User's Guide