Intermec SF61B SF61 Cordless Scanner User's Guide - Page 21
Beeps and Vibrate Alert, Default Status Light Description When the Scanner is Docked in a, Charger
![]() |
View all Intermec SF61B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 1 - Introducing the SF61B Cordless Scanner Default Status Light Description When the Scanner is Docked in a Charger Light State What it Means Red continuously on NVM (non-volatile memory) problem. and 6 fast beeps every 2 seconds Amber blinking Battery charging problem: • battery failure Solution: Replace the battery. • temperature problem: the integrated charge handler in the SF61B refuses to charge the battery due to storage or use of the SF61B and/or the battery charger outside the recommended battery charging temperature range (see recommended "Charging" temperature range in Temperature and Environmental Specifications in the Appendix) Solution: Move the SF61B (and battery) and/or battery charger to a location where they can regain the recommended charging temperature and charge the battery (no need to replace the battery). Beeps and Vibrate Alert Note: The following table shows the default behavior of the beeps and vibrate alert, you can use EasySet to modify many of these settings if you wish (Operating settings > Beeps / LEDs). The SF61B beeps to give you audio feedback and vibrates when performing some functions. For example, you hear a beep each time you scan a valid bar code. Default SF61B Beep and Vibrate Alert Descriptions Beep Sequence What it Means Single beep and Good read - the scanner successfully scanned a bar code. vibrate alert Two fast beeps and Power-up. vibrate alert SF61 Cordless Scanner User's Guide 11
![](/manual_guide/products/intermec-sf61b-sf61-cordless-scanner-users-guide-00c6f3d/21.png)