Invacare 9SL Owners Manual - Page 39
Front Riggings
View all Invacare 9SL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
5 Front Riggings 5 FRONT RIGGINGS ƽ WARNING After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or damage may occur. 5.1 Installing/Removing Front Riggings Installing 1. Turn the front rigging assembly to the side (open front rigging is perpendicular to wheelchair). 2. Install the hinge plates of the front rigging assembly onto the hinge pins on the wheelchair frame. When performing STEP 3, it may be necessary to pull release lever toward front of chair to assist the front rigging to lock in place. 3. Push the front rigging assembly towards the inside of the wheelchair until it locks into place. The footplate will be on the inside of the wheelchair when locked in place. 4. Repeat this procedure for the other front rigging assembly. 5. To release the front rigging, push the front rigging release lever inward, rotate front rigging outward. Removing 1. Push the front rigging release lever inward. 2. Rotate swingaway front rigging assembly outward. 3. Lift the swingaway front rigging assembly off the hinge pins. Part No. 1056953 39 Invacare® 9000 Series Wheelchair