Invacare 9SL Owners Manual - Page 58

Adjusting Quick-Release Axle

Get Invacare 9SL PDF manuals and user guides View all Invacare 9SL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

8 REAR WHEELS ƽ WARNING Make sure detent pin and detent balls of the quick-release axles are fully released before operating the wheelchair. 5. Reinstall rear wheel to the wheelchair. Refer to Removing/Installing Rear Wheels on page 55. 6. If the detent balls of the quick-release axles (if applicable) are not protruding past the inside of the axle bushing or there is too much movement of the rear wheel assembly in a back and forth position, refer to Adjusting Quick-Release Axle on page 58. 7. Repeat STEPS 1-6 for the opposite rear wheel if necessary. 8.2 Adjusting Quick-Release Axle ƽ WARNING NEVER use quick-release axles on the 9000 XT (models with offset axle option only), 9000XDT or 9000XT recliner wheelchairs. 1. Remove rear wheel and quick-release axle from the wheelchair. Refer to Removing/Installing Rear Wheels on page 55. 2. Depress detent pin in the quick-release axle and slide axle through the rear wheel hub. 3. Release detent pin ensuring that the detent balls are fully released. 4. Increase or decrease end play by adjusting the locknut on the end of the quick-release axle. ƽ WARNING Make sure detent pin and detent balls of the quick-release axles are fully released before operating the wheelchair. Keep detent balls clean. 5. Reinstall rear wheel onto the wheelchair. Refer to Removing/Installing Rear Wheels on page 55. Invacare® 9000 Series Wheelchair 58 Part No. 1056953

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
8
REAR WHEELS
Invacare® 9000 Series Wheelchair
58
Part No. 1056953
5.
Reinstall rear wheel to the wheelchair. Refer to Removing/Installing Rear Wheels
on page 55.
6.
If the detent balls of the quick-release axles (if applicable) are not protruding past the inside of the axle bushing or there is too much movement
of the rear wheel assembly in a back and forth position, refer to Adjusting Quick-Release Axle
on page 58.
7.
Repeat STEPS 1-6 for the opposite rear wheel if necessary.
8.2
Adjusting Quick-Release Axle
1.
Remove rear wheel and quick-release axle from the wheelchair. Refer to Removing/Installing Rear Wheels
on page 55.
2.
Depress detent pin in the quick-release axle and slide axle through the rear wheel hub.
3.
Release detent pin ensuring that the detent balls are fully released.
4.
Increase or decrease end play by adjusting the locknut on the end of the quick-release axle.
5.
Reinstall rear wheel onto the wheelchair. Refer to Removing/Installing Rear Wheels
on page 55.
±
WARNING
Make sure detent pin and detent balls of the quick-release axles are fully released before operating the wheelchair.
±
WARNING
NEVER use quick-release axles on the 9000 XT (models with offset axle option only), 9000XDT or 9000XT recliner
wheelchairs.
±
WARNING
Make sure detent pin and detent balls of the quick-release axles are fully released before operating the wheelchair.
Keep detent balls clean.