Invacare 9SL Owners Manual - Page 82
Installing I.V. Rod Support Tube, Adjusting I.V. Rod,
View all Invacare 9SL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
11 RECLINER Installing I.V. Rod Support Tube The I.V. rod holder MUST already be mounted to the side frame of the wheelchair. 1. Insert the I.V. rod support tube into the rear cylinder of the I.V. rod holder. When installing the I.V. rod support tube, ensure the adjustment knob is pointing out away from the wheelchair. 2. Turn the I.V. rod support tube until the holes in the I.V. rod support tube align with the holes in the rear cylinder of the I.V. rod holder. 3. Insert mounting screw through rear cylinder, large nylon washer, small nylon washer, steel washer, and into locknut. Securely tighten. The large nylon washer MUST be inserted into hole and pressed in so that it is flush with outside surface of rear cylinder. 4. Reinstall the rear wheel from the wheelchair. Refer to Removing/Installing Rear Wheels on page 77. 5. Adjust I.V. rod to desired height. Refer to Adjusting I.V. Rod on page 82. Adjusting I.V. Rod 1. Loosen adjustment knob. 2. Adjust I.V. Rod to desired height. 3. Securely tighten adjustment knob. Invacare® 9000 Series Wheelchair 82 Attaching hardware enlarged 3X scale for clarity. Locknut Steel Washer Small Nylon Washer Large Nylon Washer Rear Cylinder Mounting Screw I.V. Rod Adjustment Knob I.V. Rod Support Tube I.V. Rod Holder FIGURE 13 Installing I.V. Rod Support Tube - Adjusting I.V. Rod Part No. 1056953