Invacare 9SL Owners Manual - Page 79

Adjusting Attendant Operated Wheel Locks, Unlocked, Position, Apply Pressure, Here to Engage, Locked

Get Invacare 9SL PDF manuals and user guides View all Invacare 9SL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 79 highlights

Unlocked Position Apply Pressure Here to Engage Locked Position 11 RECLINER Apply Pressure Here to Disengage FIGURE 10 Using Attendant Operated Wheel Locks Adjusting Attendant Operated Wheel Locks  If wheels are pneumatic, before adjusting or replacing the wheel lock assemblies, ensure that the tires are inflated to the recommended psi located on the side wall of tire. 1. Loosen the bolt and locknut that secure the wheel lock to the recliner tube. 2. Adjust the position of wheel lock so that when engaged, the wheel lock shoe embeds the tire 1/8-inch (3/16-inch for pneumatic tires) and holds the wheelchair. 3. Securely tighten the bolt and locknut. 4. Engage wheel lock and push against the wheelchair and determine if wheel lock engages the wheel lock shoe enough to hold the wheelchair. 5. Repeat the above procedures until the wheel lock holds the wheelchair. 6. Repeat STEPS 1-5 for the opposite wheel lock.  Ensure the wheel lock shoe completely covers the tire contact area. See Detail "A" for proper positioning of wheel lock shoe. Part No. 1056953 79 Invacare® 9000 Series Wheelchair

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
11
RECLINER
Part No. 1056953
79
Invacare® 9000 Series Wheelchair
FIGURE 10
Using Attendant Operated Wheel Locks
Adjusting Attendant Operated Wheel Locks
1.
Loosen the bolt and locknut that secure the wheel lock to the recliner tube.
2.
Adjust the position of wheel lock so that when engaged, the wheel lock shoe embeds the tire 1/8-inch (3/16-inch for pneumatic tires) and holds
the wheelchair.
3.
Securely tighten the bolt and locknut.
4.
Engage wheel lock and push against the wheelchair and determine if wheel lock engages the wheel lock shoe enough to hold the wheelchair.
5.
Repeat the above procedures until the wheel lock holds
the wheelchair.
6.
Repeat STEPS 1-5 for the opposite wheel lock.
If wheels are pneumatic, before adjusting or replacing the wheel lock assemblies, ensure that the tires are inflated to the
recommended psi located on the side wall of tire.
Ensure the wheel lock shoe completely covers the tire contact area. See Detail "A" for proper positioning of wheel lock
shoe.
Unlocked
Position
Apply Pressure
Here to Engage
Locked
Position
Apply
Pressure
Here to
Disengage