Invacare 9SL Owners Manual - Page 78
With Attendant Operated Wheel Locks, Using/Adjusting Wheel Locks, Using Attendant Operated
View all Invacare 9SL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
11 RECLINER With Attendant Operated Wheel Locks 1. Remove the axle mounting screw and locknut that secure the rear wheel and spacer to the wheelchair frame. 2. Remove rear wheel from side frame. 3. Secure rear wheel and spacer to wheelchair frame with axle mounting screw and locknut. Securely tighten. 4. Adjust the attendant operated wheel locks. Refer to Adjusting Attendant Operated Wheel Locks on page 79. Axle Mounting Screw Wheelchair Frame Locknut Spacer Rear Wheel FIGURE 9 Removing/Installing Rear Wheels - With Attendant Operated Wheel Locks 11.7 Using/Adjusting Wheel Locks For Using and/or Adjusting of Patient Operated Wheel Locks, refer to Using/Adjusting Disk Wheel Locks on page 65. Using Attendant Operated Wheel Locks ƽ WARNING DO NOT attempt to stop a moving wheelchair with wheel locks. Wheel locks are not brakes. 1. Perform one of the following: • Engage - Apply pressure downward on wheel lock handle. • Disengage - Lift up on wheel lock handle. Invacare® 9000 Series Wheelchair 78 Part No. 1056953