Invacare IH6077A/IH61 Owners Manual - Page 18

Locking/Unlocking the Rear Wheels, Installing/Storing the Tray

Page 18 highlights

SECTION 4-OPERATION Locking/Unlocking the Rear Wheels NOTE: For this procedure, refer to FIGURE 4.6. 1. Push down on the wheel lock mechanism to engage the wheel locks. 2. Release the wheel locks by pushing the other side of the lock mechanism downward. Locking Unlocking Wheel Lock Mechanism Wheel Lock Mechanism FIGURE 4.6 Locking/Unlocking the Rear Wheels Installing/Storing the Tray Model IH6074A NOTE: For this procedure, refer to FIGURE 4.7. NOTE: Reverse this procedure to remove the tray. 1. Pull down on the plunger release knobs on both arms and twist them ¼‐turn to lock them in the open position. 2. Pull the tray forward and clear from the hanger located on the side of the recliner. 3. Align the alignment rods with the mounting brackets under the armrests of the recliner. 4. Insert the alignment rods into the mounting brackets. 5. Slide the tray to the desired position until an audbile click is heard. DETAIL "A" - FRONT VIEW Mounting Bracket (Hidden from View) Tray Armrest DETAIL "B" - SIDE VIEW Alignment Rod Tray Armrest Hanger Plunger Release Knob Alignment Rods Mounting Bracket Alignment Rod FIGURE 4.7 Installing/Storing the Tray - Model IH6074A Invacare Mobile Recliners 18 Part No. 1141494

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

SECTION 4—OPERATION
Invacare Mobile Recliners
18
Part No. 1141494
Locking/Unlocking the Rear Wheels
NOTE: For this procedure, refer to FIGURE 4.6.
1.
Push down on the wheel lock mechanism to engage the wheel locks.
2.
Release the wheel locks by pushing the other side of the lock mechanism downward.
FIGURE 4.6
Locking/Unlocking the Rear Wheels
Installing/Storing the Tray
Model IH6074A
NOTE: For this procedure, refer to FIGURE 4.7.
NOTE: Reverse this procedure to remove the tray.
1.
Pull down on the plunger release knobs on both arms and twist them ¼
turn to lock
them in the open position.
2.
Pull the tray forward and clear from the hanger located on the side of the recliner.
3.
Align the alignment rods with the mounting brackets under the armrests of the
recliner.
4.
Insert the alignment rods into the mounting brackets.
5.
Slide the tray to the desired position until an audbile click is heard.
FIGURE 4.7
Installing/Storing the Tray - Model IH6074A
Locking
Unlocking
Wheel Lock
Mechanism
Wheel Lock
Mechanism
Plunger
Release Knob
Tray
Hanger
Tray
Mounting
Bracket
Mounting Bracket
(Hidden from View)
Armrest
Armrest
Alignment Rods
Alignment Rod
Alignment Rod
DETAIL “B” - SIDE VIEW
DETAIL “A” - FRONT VIEW