Invacare IH6077A/IH61 Owners Manual - Page 22
Replacing the Footrest Cushion
View all Invacare IH6077A/IH61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
SECTION 5-MAINTENANCE Model IH6077A NOTE: For this procedure, refer to FIGURE 5.2. Removing 1. Remove the pan head mounting screw that secures the recline cable to the existing back cushion. 2. Remove the four long hex head screws that secure the back cushion to the back frame. 3. Remove the four short hex head screws from each of the two headrest brackets. NOTE: Reinstall the pan head mounting screw on the new back cushion assembly in approximately the same location as on the old back assembly. Installing 1. Align new back cushion with seat and frame. 2. Install four long hex screws to secure the back cushion to the back frame as shown in FIGURE 2. Securely tighten. 3. Secure the headrest bracket to the back cushion with four short hex screws. Securely tighten. Back Cushion Headrest Bracket Push Handle Back Frame Long Hex Screws Pan Head Mounting Screw Short Hex Screws Long Hex Screws FIGURE 5.2 Replacing the Back Cushion - Model IH6077A Replacing the Footrest Cushion ƽ WARNING DO NOT stand on the footrest or seat when entering or exiting the recliner. The recliner will tip and bodily injury may occur. NOTE: For this procedure, refer to FIGURE 5.3 on page 23. Invacare Mobile Recliners 22 Part No. 1141494