JVC D870U Instruction Manual - Page 20
Auto/Manual Mode, Time Code, Recording From The Middle Of A Tape, Auto Mode, Manual Mode
UPC - 046838032493
View all JVC D870U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
20 EN Recording & Playback Auto/Manual Mode Press AUTO button repeatedly to switch to auto/manual recording mode. When manual mode is selected, the indicator "M" appears on the LCD monitor. Auto Mode : A You can record using no special effects or manual adjustments. Manual Mode : M Recording is possible by setting various functions manually. "00:00:00". To prevent this, perform Recording From The Middle Of A Tape (੬ 20) in the following cases; • When shooting again after playing back a recorded tape. • When power shuts off during shooting. • When a tape is removed and re-inserted during shooting. • When shooting using a partially recorded tape. • When shooting again after shooting a scene then opening/closing the cassette holder cover. !54/ -!.5!, Notes: • The time code cannot be reset. • During fast-forwarding and rewinding, the time code indication does not move smoothly. • The time code is displayed only when "TIME CODE" is set to "ON". (੬ 31) Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. Display Seconds Minutes 12:34:24 Frames* (30 frames = 1 second) Recording From The Middle Of A Tape 1 Play back a tape or use Blank Search (੬ 22) to find the spot at which you want to start recording, then engage the Still Playback mode (੬ 21). 2 Set the Power Switch to "REC" (੬ 13), then start recording. * Frames are not displayed during recording. Recording Start Point Recording portion Recorded tape 1234 Blank portion 1, 3 & 4, time code begins counting from "00:00:00" (minute:second:frame). 2, time code continues from the last time code number. If during recording a blank portion is left partway through the tape, the time code is interrupted. When recording is resumed, the time code starts counting up again from