JVC D870U Instruction Manual - Page 27

D.S.C. Recording & Playback EN 27 To Print By Selecting Still Images And Number Of Prints 1 Perform steps 1 - 4 in "To Print All Still Images (One Print For Each)" (੬ 26). 2 Select "CURRENT", press SET. The DPOF screen appears. 3 Press g or k to select the desired file. 4 Press f or e to select the number indication (00), and press SET. 5 Select the number of prints by pressing e to increase the number, or f to decrease the number, and press SET. To Reset The Number Of Prints 1 Perform steps 1 - 4 in "To Print All Still Images (One Print For Each)" (੬ 26). 2 Select "RESET", press SET. The DPOF screen appears. 3 Select "EXECUTE", press SET. • To cancel selection, select "RETURN". • The number of prints is reset to 0 for all still images. Caution: While performing the above, never disconnect power, as this may cause the memory card to be corrupted. Note: When the image is printed from the printer, a black bar appears at the bottom of the screen. This is not a malfunction. By recording with "DIS" deactivated (੬ 29) this can be avoided. Initializing A Memory Card • Repeat steps 3 through 5 for the desired number of prints. • The number of prints can be set up to 15. • To correct the number of prints, select the image again and change the number. 6 Select "RETURN", press SET. The "SAVE?" appears. You can initialize a memory card any time. After initializing, all files and data stored in the memory card, including those which have been protected, are cleared. 1 Perform steps 1 - 3 in "Normal Playback Of Images" (੬ 24). 2 Press MENU. 3 Select "MEMORY CARD" ( ). 4 Select "FORMAT", press SET. The FORMAT menu appears. • If you did not change any settings in step 3 through 5 , the DPOF Menu reappears. 7 Select "EXECUTE", press SET. • To cancel selection, select "CANCEL". 5 Select "EXECUTE", press SET. The memory card is initialized. • When initialization is finished, "NO IMAGES STORED" appears. • To cancel initialization, select "CANCEL". ENGLISH