JVC DT-V1900CGU Instruction Manual - Page 11

BASIC MENU OPERATIONS (MAIN MENU, SETUP MENU) Ⅵ ABOUT MENU SCREENS This monitor features a MAIN MENU (main menu screen) and a SETUP MENU (setup menu screen). The MAIN MENU contains the functions normally used, and the SETUP MENU contains the settings required for initial setup. APERTURE CONTROL SLOT CONDITION sub menu POSITION :LOWER AREA MARKER :OFF AREA MARKER-R :OFF CENTER MARKER :OFF COLOR MATRIX EXIT: MENU ENTER:+ SELECT: FUNCTION SETTING PICTURE SUB ADJ. COLOR TEMP/BAL. SIZE/POSI.ADJ. DISTORTION ADJ. STATUS DISPLAY CONTROL LOCK all reset :ON EXIT: MENU ENTER:+ SELECT: MAIN MENU (main menu screen) SETUP MENU (setup menu screen) NOTE : The contents of menus vary depending on the input signal or combination of the monitor's settings. APERTURE CONTROL SLOT CONDITION sub menu POSITION :LOWER COLOR MATRIX SLOT CONDITION sub menu POSITION :LOWER EXIT: MENU ENTER:+ SELECT: EXIT: MENU ENTER:+ SELECT: MAIN MENU when the video signal is input MAIN MENU when the RGB signal is input Ⅵ DISPLAYING THE MENU SCREENS ● To display MAIN MENU Press the button on the front panel. MENU ●To display SETUP MENU Press the button while pressing the front panel. button on the MUTING VOLUME DEGAUSS MENU MUTING VOLUME UNDER DEGAUSS SCAN PULSE CROSS COLOR OFF MENU SCREENS ASPECT AREA CHECK MARKER SLOT 1 SLOT 2 SLOT 3 A B C D E F INPUT SELECT POWER Ⅵ CLOSING THE MENU SCREENS ● Using the MENU button Press the button a few times until the Menu Screen MENU disappears. ● With no operation When approx. 30 seconds have passed since the last Menu operation, both screens will disappear. * Some items on the Menu Screens disappear automatically after setting. NOTE : When you perform the "reset" or "all reset" function, the Menu Screen does not disappear unless you press the button. MENU Ⅵ BASIC MENU OPERATION ● To select an item, Press the or buttons to move the cursor (4) on the Menu Screens and select the desired item. ● To set (select) or adjust an item, Press the or buttons to select or adjust the desired item. ● When the desired item has other menus (hierarchical menus), Press the button to display the lower hierarchical menu. ● To return to the former Menu Screen, Press the button. MENU APERTURE CONTROL SLOT CONDITION sub menu POSITION :LOWER AREA MARKER :OFF AREA MARKER-R :OFF CENTER MARKER :OFF COLOR MATRIX EXIT: MENU ENTER:+ SELECT: MENU Press the or buttons to select or adjust the item. Cursor Move (select) with the or buttons. LEVEL CONTROL FREQ. sub menu reset :00 :HIGH EXIT: MENU ENTER:+ SELECT: Menu in an item Ⅵ HOW TO USE THE SUB MENU The sub menu function applies to Menu Screen items that should be adjusted or set while watching the picture. This function simplifies the adjustment or setting while watching the picture by displaying the single item on the top or bottom of the screen. ● To use the sub menu function, Press the or buttons to select " sub menu". Then, press the button to display the sub menu screen. ● To adjust or set an item in the sub menu screen, Press the or buttons. ● To change the item to be adjusted or set, Press the or buttons. ● To change the position of the sub menu screen, Set "UPPER" (on the top) or "LOWER" (on the bottom) in "sub menu POSITION" of MAIN MENU. ● To close the sub menu screen, Press the button. The previous Menu Screen is MENU displayed. Example of sub menu screen CONTRAST BRIGHT CHROMA PHASE NTSC SETUP COMPO.LEVEL sub menu reset : 00 : 00 : 00 : 00 : 00 :SMPTE EXIT: MENU ENTER:+ SELECT: CONTRAST - - : 00 + + CONTRAST - - : 00 + + The upper pale screen; when setting "UPPER" in "sub menu POSITION" The lower dark screen; when setting "LOWER" in "sub menu POSITION" 11 LCT1117-001C 11 02.6.6, 11:38 AM