JVC DT-V1900CGU Instruction Manual - Page 6
Component/rgb Input Card Optional, If-c01comg, Video Input Card Optional: If-c01png
View all JVC DT-V1900CGU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) Ⅵ COMPONENT/RGB INPUT CARD (OPTIONAL: IF-C01COMG) G/Y IN OUT B/PB/B-Y 1 IN OUT R/PR/B-Y 1 Video input/output terminals Input (IN) and output (OUT) terminals for component (color difference) or RGB signals. The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.) Select component signal : press INPUT SELECT A/C/E button Select RGB signal : press INPUT SELECT B/D/F button IN OUT HD/CS IN OUT VD 2 IN OUT AUDIO 3 IN OUT 4 2 Synchronized signal input/output terminals Input (IN) and output (OUT) terminals for the vertical, horizontal or complex synchronized signals. Function differs depends on the SYNC SELECT setting in the FUNCTION SETTING setup menu. For details, refer to Page 16. The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.) Ⅵ Compatible signal formats: 480/60i, 576/50i, 576/50p, 480/60p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/24psF 3 Audio input/output terminals Input (IN) and output (OUT) terminals for audio signals. The IN and OUT terminals are bridge-connected. 4 Connection terminal (to a Multi-Format Monitor) Attach to the connection terminal of your Multi-Format Monitor. Ⅵ VIDEO INPUT CARD (OPTIONAL: IF-C01PNG) VIDEO 1 IN OUT VIDEO 2 1 IN OUT Y/C IN 2 EXT.SYNC 5 3 IN OUT AUDIO 1 IN OUT 4 AUDIO 2 Ⅵ Compatible signal formats: NTSC (3.58 MHz), PAL (4.43 MHz), black-and-white (50 Hz/60 Hz) * You can select "AUTO" (automatic selection), "NTSC" or "PAL" in SETUP MENU when switching NTSC or PAL. Normally select AUTO. However, if the input signal is unstable, select NTSC or PAL. 1 Video input/output terminals Input (IN) and output (OUT) terminals for video signals. The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.) Select VIDEO 1 : press INPUT SELECT A/C/E button Select VIDEO 2 : press INPUT SELECT B/D/F button 2 S-video input terminal Input terminal for the S-video signal. When an S-video signal is input to this terminal and a video signal is input to VIDEO 2, the S-video signal has priority over the video signal. When choosing the S-video input, press INPUT SELECT B/D/F button. 3 Synchronized signal input/output terminals Input (IN) and output (OUT) terminals for the complex synchronized signals. Function differs depends on the SYNC SELECT setting in the FUNCTION SETTING setup menu. For details, refer to Page 16. The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.) 4 Audio input/output terminals Input (IN) and output (OUT) terminals for audio signals corresponding to VIDEO 1 and VIDEO 2. The IN and OUT terminals are bridge-connected. 5 Connection terminal (to a Multi-Format Monitor) Attach to the connection terminal of your Multi-Format Monitor. 6 LCT1117-001C 6 02.6.6, 11:38 AM