JVC DT-V1900CGU Instruction Manual - Page 19

6. STATUS DISPLAY Makes the status of the input signal appear or disappear on the screen. Press the button to display the setting menu illustrated on the right. STATUS DISPLAY 1080/1035 :ON :1080 EXIT: MENU ADJUST:- + SELECT: Item Settings Function : STATUS DISPLAY : ON/OFF : Makes the format name appear or disappear when signals are input and the signal status appear or disappear when the input signal is changed. ON : The information is displayed. OFF : The information is not displayed. Item Settings Function : 1080/1035 : 1080/1035 : Makes the number of effective scanning lines appear or disappear when the HDTV signal is input. 1080 : Sets the number to 1080. (Select when the digital HDTV signal is input.) 1035 : Sets the number to 1035. (Select when the analog HDTV signal is input.) 7. CONTROL LOCK Item : CONTROL LOCK Settings : OFF/ON Function : Invalidates most of operations on the front panel (including menu screen operations). OFF : Enables normal operations. ON : Invalidates all operations except the power switch and CONTROL LOCK. NOTE: While CONTROL LOCK is set to ON, attempting to perform any operation except power switch and CONTROL LOCK causes the " Control lock on!" warning to appear on the screen for approx. 3 seconds. (It is possible to operate the power switch and display SETUP MENU.) When SETUP MENU is displayed while CONTROL LOCK is set to ON, the cursor (4) is located next to CONTROL LOCK and cannot be moved. 8. all reset Function : Sets all items in SETUP MENU to factory-preset values. LCT1117-001C 19 02.6.6, 11:39 AM 19