JVC GD-V422UA Instruction Manual - Page 23

PICTURE Adjustments Item Effect Adjustments PICTURE Less BRIGHTNESS Darker More Brighter Adjusts the proper picture contrast. Adjusts for easier viewing of dark pictures such as night scenes and black hair. COLOR TINT (NTSC only) Less Reddish More Greenish Adjusts color saturation. Adjust for natural flesh tones. SHARPNESS Less Adjusts picture sharpness. More Notes: (1) "COLOR" and "TINT" settings cannot be adjusted for "RGB" and "PC" input signals. (2) You can change the level of each function (PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS) for each PICTURE menu. (3) The setting details for STANDARD, DYNAMIC and CINEMA respectively are memorized separately for each input mode (INPUT1, INPUT2 , INPUT3 and PC IN). (4) The "TINT" setting can be adjusted for NTSC signal only during "VIDEO (S VIDEO)" input signal. Note: In PICTURE, there is nor a noticeable change even when contrast is increased with a bright picture or reduced with a dark picture. ADVANCED SETTINGS Item BLACK EXTENSION Effect Less More Details Adjusts the dark shades of the image in gradation. (This cannot be adjusted when the input signal is RGB or PC.) INPUT LEVEL Less W / B HIGH R Less W / B HIGH B Less Adjustment of parts which are extremely bright and hard to see. More Adjusts the white balance for light red areas. More Adjusts the white balance for light blue areas. More W / B LOW R Less Adjusts the white balance for dark red areas. More W / B LOW B Less Adjusts the white balance for dark blue areas. More GAMMA S CURVE 2.0 2.2 2.5 Down Up AGC Increases the brightness of dark signal automatically. OFF ON Notes: (1) Carry out "W / B" adjustment as follows. A Adjust the white balance of the bright sections using the "W / B HIGH R" and "W / B HIGH B" settings. B Adjust the white balance of the dark sections using the "W / B LOW R" and "W / B LOW B" settings. C Repeat steps A and B to adjust. Steps A and B affect each other's settings, so repeat each step in turn to make the adjustment. (2) The adjustment values are memorized separately for each input mode (INPUT1, INPUT2 , INPUT3 and PC IN). (3) The adjustment range values should be used as an adjustment reference. Helpful Hint ( N / NORMALIZE Normalization) On the remote control unit, while the "ADVANCED SETTINGS" menu is displayed, if either the N button is pressed at any time or the (ACTION button) is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings. 23