JVC GD-V422UA Instruction Manual - Page 75

Specifications Power Source Power Consumption Normal use Stand-by condition Power off condition Plasma Display panel Contrast Ratio Screen size (No.of pixels) Operating condition Temperatuer Humidity Applicable signals Colour System Scanning format PC signals Connection terminals PC SERIAL SPEAKERS (6 Ω) Accessories Supplied Remote Control Transmitter Batteries Fixing bands Ferrite core Dimensions (W × H × D) GD- V422PCE GD-V502PCE 220 - 240 V AC, 50Hz/60 Hz 335W 445 W Save off 1.9 W, Save on 1.1 W 0.4 W Drive method : AC type Drive method : AC type 42-inch, 16:9 aspect ratio 50-inch, 16:9 aspect ratio 3000:1 920 mm (W) × 518 mm (H) × 1,056 mm (diagonal) 1,106 mm (W) × 622 mm (H) × 1,269 mm (diagonal) 786,432 (1,024 (W) × 768 (H)) 1,049,088 (1,366 (W) × 768 (H)) [3,072 × 768 dots] [4,098 × 768 dots] 0 °C - 40 °C 20 % - 80 % NTSC, PAL, PAL60, SECAM, Modified NTSC 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 50i · 24p · 24sF ···· SMPTE274M, 1250 (1080) / 50i XGA display VGA, SVGA, XGA SXGA, UXGA ···· (compressed) Horizontal scanning frequency 15 - 110 kHz Vertical scanning frequency 48 - 120 Hz (HIGH-DENSITY MINI D-SUB 15PIN) R,G,B/0.7 Vp-p (75-ohm) Component Y : 1.0 Vp-p (75-ohm : include sync) PB/CB : ± 0.35 Vp-p (75-ohm) PR/CR : ± 0.35 Vp-p (75-ohm) HD, VD/1.0 - 5.0 Vp-p (high impedance) AUDIO IN (M3 JACK) 0.5 Vrms (high impedance) EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLE 16W [8 W + 8 W] (10 % THD) EUR646532 2 × R6 Size (TMME203 or TMME 187) × 2 Small size × 1, Large size × 2 1,020 mm × 610mm × 89mm 1,210 mm × 724mm × 95mm 1,020 mm 89 mm 1,210 mm 95 mm 610 mm 724 mm Mass (weight) main unit only with speakers R - STANDBY G POWER ON - + INPUT MENU VOL ENTER approx. 29.5 kg net approx. 33.7 kg R - STANDBY G POWER ON - + INPUT MENU VOL ENTER approx. 43.5 kg net approx. 48.1 kg Notes: (1) Design and specifications are subject to change without notice. Mass and dimensions shown are approximate. (2) This equipment complies with the EMC standards listed below. EN55022, EN61000-3-2, EN61000-3-3, EN61000-6-2. 35