JVC GD-V422UA Instruction Manual - Page 57

Adjusting Picture Pos./ Size Adjusting screen 1 PICTURE POS. /SIZE Press to display the Picture Pos./ Size menu. 2 Press to select H-Pos / H-Size / V-Pos / V-Size / Clock Phase. INPUT SURROUND VOL N R PICTURE SOUND SET UP MULTI PIP SWAP SELECT MOVE PICTURE POS. /SIZE ASPECT During "AV(S Video)" and "Component" input signal. During "RGB" and "PC" input signal. Picture Pos./Size Normalise H-Pos H-Size V-Pos V-Size Normal Picture Pos./Size Normalise Normal H-Pos H-Size V-Pos V-Size Clock Phase 3 Press to adjust Pos./ Size. R Press to exit from adjust mode. PC OFF TIMER PLASMA DISPLAY Notes: (1) Adjustment details are memorized separately for different input signal formats (Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p· 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB / PC signals are memorized for each frequency.) (2) If a "Cue" or "Rew" signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the Picture Pos./ Size function. When the Position Left " " button is pressed. When the Position Right " " button is pressed. H-Pos H-Size When the Position Left " " button is pressed. When the Position Right " " button is pressed. V-Pos V-Size When the Position Left " " button is pressed. When the Position Right " " button is pressed. When the Position Left " " button is pressed. When the Position Right " " button is pressed. Clock Phase Flickering and distortion can be eliminated by using the Position Left " " or Right " " button (RGB/PC in Mode) to carry out adjustment. Note: Using the size adjustment function to display a picture with the aspect ratio changed from the original for the purpose of the public display or commercial gain may infringe on copyright laws. Helpful Hint ( N / Normalise Normalisation) While the Picture Pos./ Size display is active, if either the N button on the remote control is pressed at any time or the (ACTION button) is pressed during "Normalise", then all adjustment values are returned to the factory settings. 17