JVC GD-V422UA Instruction Manual - Page 72
H-Freq. kHz / V-Freq. Hz, Setup for input signals
View all JVC GD-V422UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Setup for input signals Sync Select Signal from the "Setup" menu during RGB input signal. Press to adjust. R Press to exit from adjust mode. Setup 1/2 Component/RGB-in select RGB Input label RGB1 Signal Screensaver Power save Off Standby save On Power management Off OSD Language English (UK) Press (ACTION) button Signal Sync [ RGB ] H & V H-Freq. 31.5 kHz V-Freq. 60.0 Hz Setting RGB sync signal: Confirm that the input is set to RGB input (this setting is valid only for RGB input signal). Sync H & V H & V: The H and V sync signals are input from the HD / VD connector. on G: Uses a synchronized signal on the Video G signal, which is input from the G connector. Sync on G CS: Uses a synchronized signal of Composite Sync input. Sync CS H-Freq. (kHz) / V-Freq. (Hz) Displays the H (Horizontal) / V (Vertical) frequencies. This display is valid only for RGB input and PC input signals. Display range: Horizontal 15 - 110 kHz Vertical 48 - 120 Hz H-Freq. 31.5 kHz V-Freq. 60.0 Hz 32