JVC GR-DVM50U Instruction Manual - Page 26

26 EN A M Operation Switch Power lamp CAMERA 5S PLAY OFF Power Switch SNAPSHOT MODE ,,,,,,,, Button PIN-UP Pin-Up mode ,,,,,,,,,, FRAME Snapshot mode with ,,,,,,,FfrUa,,mLL,e,*,,,, Snapshot mode with no frame* RECORDING Advanced Features (cont.) Snapshot Use your camcorder like a regular camera and take a snapshot, or several of them in succession. Lock Button SNAPSHOT Button Display FULL SNAPSHOT MODE SELECTION 1 SELECT OPERATION MODE Set the Operation Switch to " " or " ". Then, set the Power Switch to " " while pressing down the Lock Button. Pull out the viewfinder fully or open the LCD monitor fully. 2 SELECT SNAPSHOT MODE Choose the appropriate mode from among the 5 Snapshot modes by pressing SNAPSHOT MODE. Press SNAPSHOT MODE as many times as necessary until the desired snapshot mode indicator is displayed. Snapshot mode SNAPSHOT RECORDING 1 TAKE SNAPSHOT Press SNAPSHOT. PHOTO During snapshot If you press during Record-Standby PHOTO" appears and a still image will be recorded for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode. If you press during Recording PHOTO" appears and a still image will be recorded for approx. 5 seconds, then the normal recording resumes. MULTI-4 Multi-Analyzer 4 MULTI-9 Multi-Analyzer 9 * :There is a momentary camera shutter-type blackout together with the sound effect of a shutter closing, which is recorded together with the image. Motor Drive Mode Keeping SNAPSHOT pressed provides an effect similar to serial photography. (The interval between the still images: approx. 1 second.) To Remove The Shutter Sound. . . .... when you don't want to hear the shutter sound, set BEEP/TALLY to "OFF" in the System Menu (੬ pg. 28, 30). Though the sound is not heard from the speaker, it is recorded on the tape. NOTES: ● Even if "MULTI-4" or "MULTI-9" is engaged, Snapshot recording will be performed in the FULL mode during Digital Zoom. ● If Snapshot recording is not possible, "PHOTO" blinks when SNAPSHOT is pressed. ● Even if Program AE with special effects (੬ pg. 34) is engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks. ● During playback as well, all Snapshot modes are available. The shutter sound is not heard. ● When a cable or headphone set is connected to the AV OUT connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape.