JVC GR-DVM50U Instruction Manual - Page 48

48 EN PC with DV connector- equipped capture board PC To DV connector To RS-232C DV cable (optional) PC connection cable (provided) Core filter To DV IN/OUT Open the connector cover. Core filter To PC (DIGITAL STILL) PLAYBACK Advanced Connections Connection To A Personal Computer This camcorder can transfer still images to a personal computer by using the provided software when connected as shown in the illustration. It is also possible to transfer still images to a personal computer with a DV connectorequipped capture board installed. 1 CONFIRM POWER-OFF STATUS Make sure the camcorder and PC are turned off. 2 CONNECT TO PC Connect the camcorder or Docking Station to your PC using the appropriate cable as shown in the illustration. •To attach the camcorder to Docking Station, refer to "Docking Station Attachment" on pg. 46. 3 TURN ON POWER Turn the camcorder's Power Switch to " " while pressing down the Lock Button and turn on the PC. NOTES: ● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (੬ pg. 9). ● Never connect the PC connection cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder. ● The date/time information cannot be captured into PC. ● Also refer to the instruction manuals of the provided Software and the DV connector-equipped capture board. ● Be sure to use a DV cable with the core filter. Lock Button Power Switch