JVC GR-DVM50U Instruction Manual - Page 9

GETTING STARTED 1 2 BATT. RELEASE Switch ATTENTION: Before detaching the power source, make sure that the camcorder's power is turned off. Failure to do so can result in a camcorder malfunction. To AC outlet Power cord AC Power Adapter/ Charger AA-V50U To DC OUT terminal DC cord USING THE BATTERY PACK 9 EN 1 ATTACH BATTERY PACK Insert the terminal end 1 of the battery pack into the battery pack mount, then firmly push the end 2 of the battery pack in the direction of the arrow until it locks into place as shown in the illustration. •If the battery pack is attached in the wrong position, a malfunction may occur. To Detach The Battery Pack. . . .... while sliding down BATT. RELEASE, detach it. NOTES: ● Continuous shooting is possible when the temperature is approx. 20˚C/68˚F. ● However, continuous shooting capability is reduced significantly under the following conditions: • The temperature is below 10˚C/50˚F. • Zoom or Record-Standby mode is engaged repeatedly. • The LCD monitor is used repeatedly. Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time. Approximate recording time Batterypack BN-V507U BN-V514U BN-V856U LCD monitor on/ Viewfinder off 55 min. 115 min. 7 hrs. 30 min. LCD monitor off/ Viewfinder on 65 min. 130 min. 8 hrs. 30 min. INFORMATION: VU-V856KIT is a set composed of the BN-V856U battery pack and AA-V80U AC Power Adapter/Charger. Also read thoroughly the VU-V856KIT's instruction manuals. It is impossible to charge the BN-V856U battery pack using the provided AC Power Adapter/Charger. Use the optional AA-V80U AC Power Adapter/Charger. USING AC POWER Use the AC Power Adapter/Charger (connect as shown in the illustration). NOTES: ● The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V. ● For other notes, ੬ pg. 8. To battery pack mount