JVC KW-NSX1 Operating Instructions - Page 45
Setting menu items
View all JVC KW-NSX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Setting menu items Audio ENGLISH • When changing settings for , and setting in , turn off the AV source. For other settings, change them when the AV source is turned on. Menu item Selectable setting/item Initial: Underlined Fader/Balance Fader : Adjust the front and rear speaker output balance. ♦ F6 to R6; Initial 0 • When using a two-speaker system, set the fader to the center (0). Balance : Adjust the left and right speaker output balance. ♦ L6 to R6; Initial 0 Press [5/∞/2/3] or drag [ ] to adjust. • To clear the adjustment, press [Center]. Equalizer Loudness Crossover Change the sound mode or adjust and store the equalization for each source. (☞ page 38) ♦ Flat/Natural/Dynamic/Vocal Boost/Bass Boost/Vibrant/User You can activate/deactivate loudness. ♦ On : Boost low and high frequencies to produce a well- balanced sound at a low volume level. ♦ Off : Cancels. Adjust the crossover frequency. (☞ page 39) Volume Adjust Amplifier Gain* Speaker Select Adjust and store the auto-adjustment volume level for each source. (For discs, the adjustment is stored for each of the following categories: DVD/ DVD-VR, VCD/CD, and DivX/MPEG1/MPEG2/MP3/WMA/WAV.) The volume level will automatically increase or decrease when you change the source. ♦ -15 to +06; Initial 00 ♦ On : Activates the built-in amplifier. ♦ Off : Deactivates the built-in amplifier. Select the size of the connected speaker. ♦ Standard/Narrow/Middle/Wide * To change the setting, turn off the AV source by pressing [AV Off] on screen beforehand. 45