JVC KW-NT1 Instructions - Page 70

ENGLISH AV menu items Initial: Underlined System Menu items Language *1 Time Format DST *1 (Daylight Saving Time) Time Zone*1 Tuner Area Beep Startup Message Shutdown Message Reverse Signal Polarity*1 Restore Factory Default Selectable settings Select the language used for on-screen information and voice guidance. English, Español, Français Select either 12-hour system or 24-hour system. 12 Hours, 24 Hours Activate this if your residential area is subject to DST. Auto : Activates daylight saving time. Off : Cancels. Select your residential area from one of the following time zones for clock adjustment. Hawaii, Alaska, Pacific, Mountain, Central, Eastern, Atlantic, Newfoundland US : When using in North/Central/South America. FM/AM intervals are set to 200 kHz/10 kHz. EU : When using in any other areas. FM/AM intervals are set to 50 kHz (100 kHz during auto search)/9 kHz. SA : When using in South American countries where FM interval is 100 kHz. AM interval is set to 10 kHz. On: Activates the key-touch tone. Off: Cancels. Edit the voice message at startup/shutdown of the System. • To edit the message, press [Edit], enter the message, then press [OK].*2 You can listen to the edited message by pressing [Test]. Battery, GND (☞ page 9) Initialize all settings you have made. Press [Restore] to initialize the settings. • When restoring the settings, adjust the settings on installation setting screen (☞ page 9). *1 The setting varies depending on the installation settings (☞page 9). *2 For entering the characters, ☞ page 23. 70