JVC KW-R910BT Instruction Manual - Page 19
English
View all JVC KW-R910BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
EQ D~fault:OO PRO~Q Default: XX FLAT I HARD ROCK I JAZZ I POP I R&B I TALK I USERl I USER2 I VOCAL BOOST I BASS BOOST I CLASSICAL I DANCE: Selects a preset equalizer. 1 USERl I USER2: Select apreset name. 2 Adjust your own sound settings. SUB.W*1: -08 to +08 .BASS LVL: -06 to +06 MID LVL: -06 to +06 TRE LVL: -06 to +06 1 USERl/ USER2: Select a preset name. 2 BASS I MIDDLE I TREBLE: Select asound tone. 3 Adjust the sound elements of the selected sound tone. BASS Frequency: 60/80/ 100/ 200Hz Default: (80 Hz) Level: -06 to +06 (00) Q: Ql.O/ Ql.25/ Q1.5/ Q2.0 (OLQ) MIDDLE Frequency: 0.5/ 1.0/ 1.5/ 2.5 kHz Default: (1.0 kHz) Level: -06 to +06 (00) Q: Q0.75/ Ql.O/ Q1.25 (01.25) TREBLE Frequency: 10.0/12.5/15.0/17.5 kHz Default: (10.0 kHz) Level: -06 to +06 (00) Q: Q FIX (QBX) AUDIO SETTINGS SUB.W LPF*1 FADER*3*4 THROUGH: All signals are sent to the subwoofer.; LOW 55Hz I MID 85Hz I HIGH 120Hz: Audio signals with frequencies lower than 55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer. R06- F06 (QQ): Adjusts the front and rear speaker output balance. BALANCE*3 L06- R06 (00): Adjusts the left and right speaker output balance. VOL ADJUST -05 - +05 (00): Presets the volume adjustment level of each source (compared to the FM volume level). Before adjustment, select the source you want to adjust. ("VO.L ADJ FIX" appears if FM is selected.) AMP GAIN LOW POWER: Limits the maximum volume level to 30. (Sel.ect if the maximum power ofeach speaker is less than 50 Wto prevent damaging the speakers.); HIGH POWER: The max1mum volume level is 50. D.T.EXP (Digital Track Expander) ON: Creat~s realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression.; OFF: Cancels. l/0 MODE SUB.W I REAR: Selects whether rear speakers or asubwoofer are connected to the REAR/SW line out terminals on the rear panel (through an external amplifier). *1 Displayed only when [l/0 MODE] is set to [SUB.W] and [SUB.W] is set to [ON]. *2 Displayed only when [L/0 MODE] is set t9 [SUB.W]. . *3 This adjustment will not affect the subwoofer output. *4 If you are using a two-speaker system, set the fader level to [00]. +01 I +02: Selects your preferred bass boost level.; OFF: Cancels. 01 I 02: Boosts low or high frequencies to produce a well-balanced sound at low volu.me.; OFF: Cancels. -08- +08 (Q): Adjusts the subwoofer output level. ON I OFF: Turns on or off the subwoofer output. ENGLISH 17