JVC KW-V340BT Instruction Manual America - Page 56
Wiring connection
View all JVC KW-V340BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Installation and Connection Wiring connection 10 A fuse " *2 *1 Only for KW-V340BT. *2 Only for KW-V240BT Region 4. *1 *1 ¥ *2 Purple with white stripe Light green White ] / White with black stripe [ Gray ] / Gray with black stripe [ Green ] / Green with black stripe [ Purple ] / Purple with black stripe [ Orange with white stripe Light blue with yellow stripe Blue with white stripe (12 V 350 mA) Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) Connect the antenna cord to the antenna terminal USB input terminal (1 m)*1 REVERSE To the car's reverse lamp harness when using the optional rear view camera To the car's parking brake detection switch harness PRK SW Extension wire ( ø ) (For best safety, be sure to connect the parking sensor.) To front speakers (left) / Mid-range speakers (left) for 3-way crossover To front speakers (right) / Mid-range speakers (right) for 3-way crossover To rear speakers (left) / Tweeters (left) for 3-way crossover To rear speakers (right) / Tweeters (right) for 3-way crossover STEERING WHEEL REMOTE INPUT REMOTE CONT ANT.CONT P.CONT To the car light control switch To the OE remote adapter (not supplied) which is compatible with your car To the power control terminal when using the optional power amplifier (Or) To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna Ignition key switch Car fuse To the car chassis Car battery 54 ENGLISH