JVC KY-F70BU Instruction Manual - Page 32

3. Settings and adjustments for recording (continued) Monitor adjustment The colour contrast and brightness are adjusted whilst, built-in colour bar signals of the camera are being displayed on the PC monitor. MONITOR terminal SCSI REC SEND AW/SEL MODE MENU UP DOWN SET PLAY FREEZE MONITOR LENS REMOTE ON 1 2 3 4 DC IN POWER SEE INSTRUCTION MANUAL Dip switches 1. According to the system, set the MONITOR mode to VGA. ON 1 2 3 4 Set dip switch no. 3 located on the rear of the camera to OFF. 2. Connect the VGA monitor to the MONITOR terminal. 3. Set dip switches 4 on the rear of the camera to ON. ON 1 2 3 4 4. Turn the camera power to on. 5. Adjust the VGA monitor. MEMO • For adjustment of the monitor, see the instruction manual of the monitor. • The default value of the peak level is set to 0.7 V. To change the setting to 0.58V, select BAR LEVEL in the SYSTEM SETTING screen. ( ੬ Page 60) • It is not possible to switch between the REC/PLAY modes while the colour bar is displayed. • Image data cannot be output to an MO/ Zip® drive, printer or PC while the colour bar is displayed. E28