JVC KY-F75U KY-F75U 52 page instruction manual (3MB) - Page 14
Preparations - driver
View all JVC KY-F75U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2. Preparations System The KY-F75 can be remote-controlled from a personal computer, and the live image can be shown on the computer monitor. Still images can be captured on the PC. Ⅵ When using other lenses than the motorized lens [IEEE1394] Supplied clamp filter [REMOTE] IEEE1394 cable CD-ROM supplied with KY-F75: Exclusive application software [KY-LINK] and drivers for KAFW4IU IEEE1394 Host Adapter Lens Flash Trigger switch PC KA-FW4IU (separately sold) ● Install the exclusive application software [KY-LINK] and drivers for KA-FW4IU that are included on the CD-ROM supplied with KY-F75. ● Connect the [IEEE1394] connector on the KY-F75 to the IEEE1394 PCI host adapter card on the computer using the IEEE1394 cable. Attach the clamp filter supplied with the camera to the IEEE1394 cable. The power to the KY-F75 can be supplied through the IEEE1394 connector of the computer. Caution When the KY-F75 is supplied with power though the IEEE1394 cable, make sure that the capacity on the supplying side is sufficient to meet the consumption by the KY-F75 (approximately 600 mA in the case of DC 12 V). ● When required, connect a flash or trigger-switch to the [REMOTE] connector. The trigger can also be input from the screen of the application software [KY-LINK]. The flash is fired in accordance with the input from the external trigger-switch or the trigger input from [KY-LINK]. However, in the following cases, the flash is fired irrespective of the trigger. ● During auto-white balance operation ● When one or more of the functions Auto Iris, EEI, and ALC is/are used E10