JVC KY-F75U KY-F75U 52 page instruction manual (3MB) - Page 15
When the motorized lens is used, Precautions for connection - drivers
View all JVC KY-F75U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Ⅵ When the motorized lens is used Connect to power supply (page. 16) AA-P700 AC ADAPTER AA-P700 POWER ON OFF AC [IEEE1394] AC Adapter IEEE1394 cable Supplied clamp filter [LENS] [REMOTE] [DC IN] CD-ROM supplied with KY-F75: Exclusive application software [KY-LINK] and drivers for KAFW4IU Control cable Flash Compatible zoom lens Lens remote control Fujinon S16 × 7.3DA-DSD Fujinon RMD-10 Trigger switch PC KA-FW4IU (separately sold) ● Control of the motorized lens is not possible when the [IEEE1394] connector is used to supply the power. When the motorized lens is used, the separately sold AC Adapter AA-P700 should be used to supply the power to the camera. Connect the [DC IN] connector on the KY-F75 to the AA-P700 using the DC power cable. Attach the clamp filter supplied with the KY-F75 to the DC power cable. ● Connect the camera cable from the lens to the [LENS] connector on the KY-F75. Connect the zoom and focus control cable from the lens to the lens remote control. ● The lens control possible with this unit is only control of the iris. Control of zoom and focus requires a separately sold lens remote control unit. Ⅵ Precautions for connection ● Do not turn the AC adapter's power switch ON or OFF, or connect or disconnect the IEEE1394 cable, while the application software [KY-LINK] is running. ● When connecting 2 or more cameras to one computer, multiple images can- 4 mm or shorter not be shown at the same time. ● When using a microscope adapter, use a 1/2" C-mount adapter fitting the microscope to be used. To reduce the risk of the adapter causing damage to the camera, use an adapter that is 4 mm shorter than the lens mount surface. E11