JVC KY-F75U KY-F75U 52 page instruction manual (3MB) - Page 18
Connection to computer
View all JVC KY-F75U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
2. Preparations (continued) Connection to computer Connect the KY-F75's IEEE1394 connector to the IEEE1394 host adapter card with the IEEE1394 cable. KY-F75 rear panel REMOTE LENS IEEE1394 DC IN POWER SEE INSTRUCTION MANUAL IEEE1394 cable IEEE1394 Host Adapter PC Ⅵ Attaching the clamp filter To [IEEE1394] connector ● To reduce the emission of unwanted radio waves, make sure to attach the provided clamp filter to the IEEE1394 cable as shown in the figure on the left. ● Attach the clamp filter as close as possible to the KY-F75. Ⅵ The power to the KY-F75 can be supplied through the IEEE1394 connector of the computer. However, the following precautions must be adhered to. Precautions on power supply • When supplying the KY-F75 with power though the IEEE1394 cable, make sure that the capacity on the supplying side is sufficient to meet the consumption by the KY-F75 (approximately 600 mA in the case of DC 12 V). When supplying the KY-F75 with power from the computer, make sure that sufficient power is supplied to the power supply connector of the IEEE1394 host adapter card. For details, see the instructions for the IEEE1394 host adapter card. • When the motorized lens is used, make sure to supply the power from the camera's [DC IN] connector. E14