JVC KY-F75U KY-F75U 52 page instruction manual (3MB) - Page 20
Connecting the AC adapter
View all JVC KY-F75U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2. Preparations (continued) Connecting the AC adapter It is possible to supply power to the KY-F75 from the computer via the IEEE1394 cable, but when a motorized lens, etc., is used, the DC cable should be used to connect the KY-F75's [DC IN] connector and the [TO CAMERA] connector on the AC adapter (AA-P700). AA-P700 AC 100V AC adapter (separately sold) DC 12V=OUTPUT VIDEO OUTPUT S(Y/C) OUTPUT TO CAMERA REMOTE LENS IEEE1394 EITHER OUTPUT MAX 1.25A SEE INSTRUCTION MANUAL DC IN POWER White marking Connect the end with the white marking to the AC adapter TO CAMERA connector DC cable (2 m) (separately sold) SEE INSTRUCTION MANUAL DC IN connector Clamp filter (supplied) CAUTION • Be sure to use the AA-P700 AC adapter. Make sure that the power switch on the AA-P700 AC adapter is set to OFF before connections are made. Making connections while the power is ON could result in damage to the KY-F75. Ⅵ Connecting the DC power cable and attaching the filter clamp Clamp filter DC IN POWER ● After inserting the plug completely, tighten the securing ring Plug Ring DC IN DC IN ● To reduce the emission of unwanted radio waves, make sure to attach the provided clamp filter as shown in the figure on the left. Wind the cable once around the clamp filter. ● Attach the clamp filter as close as possible to the KY-F75 as shown in the figure. E16