JVC KY-F75U KY-F75U 52 page instruction manual (3MB) - Page 46

4. Settings (continued) System setting screen Used to select the method for canceling the freeze image and decide whether or not a color bar should be displayed as test pattern. It is also used for saving the set values of the setting screens in the memory of the KY-F75. For selecting the method for canceling the freeze image. For selecting display of the color bar. For selecting the color bar level. [ ] indicates the factory setting Save button: Click this button to save the values set for the setting screens in the memory of the KY-F75. However, when KY-LINK is started up, it recalls and sets the camera to the values valid when it was closed down the previous time. Consequently, the settings saved in the camera with the Save button are made invalid. Item Freeze cancel Test pattern Pattern level When "BAR" is selected. Set Value [MANUAL] AUTO1s AUTO3s AUTO5s OFF [OFF] BAR [255] 213 Contents Sets the method for canceling the FREEZE when the monitor screen is in FREEZE condition . MANUAL : Cancelled by trigger input. AUTO1s : Cancelled after 1 second. AUTO3s : Cancelled after 3 seconds. AUTO5s : Cancelled after 5 seconds. OFF : Not cancelled. * When set to "AUTO" or "OFF", the displayed screen can be updated by trigger input during the FREEZE condition. Selects whether or not a color bar should be displayed as test pattern. OFF : Color bar is not displayed. The normal video signal is shown. BAR : Color bar is displayed. Selects the level of the color bar signal. 255 : Outputs a color bar signal in which the white level is 255. 213 : Outputs a color bar signal in which the white level is 213. E42