JVC KY-F75U KY-F75U 52 page instruction manual (3MB) - Page 40

4. Settings (continued) Process settings screen (continued) Item Noise sup. Gamma Level When "ADJUST" is selected. Nega DSP bypass Set Value LOW MIDDLE HIGH [OFF] [NORMAL] ADJUST 0.35 : (0.01 step) [0.45] : (0.05 step) : 0.90 1.00 ON [OFF] [NORMAL] BYPASS Contents Used to reduce noise in the video signal. LOW/MIDDLE/HIGH : Noise reduction is performed. Amount of reduction is increased in the order of LOW Ǟ MIDDLE Ǟ HIGH. OFF: Noise reduction is not performed. MEMO Note that details in fine sections of the image may get lost as the noise reduction amount is increased. Used to set whether the gamma curve to determine the reproduction of black is to be the standard value or customised. NORMAL: the gamma curve is set using the standard value (0.45) ADJUST: set when changing the gamma curve The gamma curve can be adjusted only when gamma is set to ADJUST. Increase the number: Improves the gradation of bright areas. However, the gradation of black becomes poorer. Decrease the number: Improves the gradation of black areas. However, the gradation of bright areas becomes poorer. Selects whether the camera image should be negative signal. ON: Conversion to negative signal is made. OFF: Conversion to negative signal is not made. Selects whether DSP (Digital Signal Processing) should be bypassed. NORMAL: Not bypassed. BYPASS: Bypassed. In this case the following setting items are fixed as indicated and cannot be set. • Detail: OFF • Level dep.: - - - • Noise sup.: OFF • Gamma: 1.00 • Nega: OFF • Pixel comp.: OFF • Color matrix: OFF E36