JVC UX-EP25 Instruction Manual - Page 11
To assemble and connect the AM loop antenna, To connect the speaker cords
![]() |
View all JVC UX-EP25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
To assemble and connect the AM loop antenna To assemble the AM loop antenna To connect the AM loop antenna Make sure to connect the wire correctly. • If the AM loop antenna wire or speaker cords are covered with vinyl, remove the vinyl to expose the tip of the antenna by twisting the vinyl. • Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor reception. To connect the speaker cords Make sure the both speakers are connected correctly and firmly. When connecting the speaker cords, match the polarity of the speaker terminals. Red (+) terminal : white cord of the speaker cord Black (-) terminal : black cord of the speaker cord • DO NOT connect more than one speaker to each terminal. • DO NOT allow the conductor of the speaker cords to be in touch with the metallic parts of the System. 7
![](/manual_guide/products/jvc-uxep25-instruction-manual-6df57e7/11.png)