JVC V25U Instruction Manual - Page 18
Mounting the Camera
View all JVC V25U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Connection / Installation Mounting the Camera Use the screw hole on the camera mounting bracket to mount this camera to a fixer or rotating platform. Camera Mounting Screw Hole 1/4-20UNC Camera Mounting Bracket Fastening Screw (2 pcs: M2.6 x 6 mm) Ⅵ Mounting the camera mounting bracket on top of the camera Camera Mounting Bracket Anti-rotation Hole Camera Mounting Bracket Caution: ● When mounting the camera, use screws with a length between 5 mm to 7 mm from the mounting surface. Screws beyond the specified length may damage the interior, while those shorter than specified may cause the camera to fall off, and therefore these must not be used. Fall Prevention Wire M3x6 mm 6 mm 2 mm 5 mm and above 7 mm and below 1/4-20UNC Caution: ● The camera mounting bracket is mounted on the top surface of the camera by default. To mount it to the bottom surface, do so by removing the two fastening screws from the camera mounting bracket. Make sure to fasten the screws firmly. 18