JVC V25U Instruction Manual - Page 65
LED State ALED State BIdentify Unit
View all JVC V25U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
LED State Page This page is for setting the method for lighting the [STATUS] indicator at the side of VN-V25U. This page can be used during access using AadminB or AoperatorB. ● Press the [OK] button to enable the new settings. A B A LED State B Identify Unit For selecting whether to light up the [STATUS] indicator of this unit when it is running. Enable : Lights up when unit is running. Disable : Turns off the indicator after startup is complete. If you want the [STATUS] indicator to blink such as during visual check of the camera currently being configured from the computer, set this item to ABlinkB. Note: ● The light of the indicator remains off if the LED State is set to ADisableB. 65
65
LED State Page
This page is for setting the method for lighting the [STATUS] indicator at the side of VN-V25U.
This page can be used during access using
A
admin
B
or
A
operator
B
.
●
Press the [OK] button to enable the new settings.
A
LED State
For selecting whether to light up the [STATUS] indicator of this unit when it is
running.
Enable
:
Lights up when unit is running.
Disable
:
Turns off the indicator after startup is complete.
B
Identify Unit
If you want the [STATUS] indicator to blink such as during visual check of the
camera currently being configured from the computer, set this item to
A
Blink
B
.
Note:
●
The light of the indicator remains off if the LED State is set to
A
Disable
B
.
A
B