JVC V25U Instruction Manual - Page 49
Setting range: 0 ~ 60 seconds], Alarm Output, Duration, Manual, Output, Sunday, Monday, Tuesday
View all JVC V25U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
B FTP C Alarm Output Duration Manual Output Time Filter: For specifying the periodic FTP transfer action with respect to each day of the week and setting the corresponding time of the day. Applicable day of week : Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday Alarm action Unmask Span : For specifying the time period for invoking the action Mask Span : For specifying the time period to stop the action Unmask All : Activated at all times Mask All : Stopped at all times Applicable time period : For specifying the start and end time in hours and minutes. Pre-/Post-recording parameter: [PrePostRecording Frame Rate] : For specifying the JPEG frame rate for FTP pre-/post-recording. [PrePostRecording Before Trigger] : For setting the FTP pre-recording trigger time (recording time before alarm input) in seconds. [Setting range: 0 ~ 60 seconds] [PrePostRecording After Trigger] : For setting the FTP post-recording trigger time (recording time after alarm input) in seconds. [Setting range: 0 ~ 60 seconds] The maximum time intervals for [PrePostRecording Before Trigger] and [PrePostRecording After Trigger] are determined by the JPEG size on the Encoding page as well as [PrePostRecording Frame Rate]. A message appears if the combination of the entered values are not feasible. For setting the alarm output. For setting the output time of [Manual Output]. [Setting range: 0/100 msec ~ 5000 msec] For operating alarm output manually. The current output status appears on the right. When [Duration] is set to "0", pressing the [Make] button switches the alarm to Make output, while pressing the [Break] button switches the alarm to Break output. When [Duration] is set to a value other than "0", pressing the [Make] button switches the alarm to Make output only during the duration of the output, upon which it switches to Break output. When the output duration is set to a value other than "0", pressing the [Break] button switches the alarm to Break output only during the duration of the output, upon which it switches to Make output. 49