JVC V25U Instruction Manual - Page 9

Name and Function of Parts, Front / Bottom / Side

Get JVC V25U - VN Network Camera PDF manuals and user guides View all JVC V25U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Name and Function of Parts Front / Bottom / Side A H B G F E C D I A Back Focus Adjustment Ring This ring is used for back focus adjustment and switching the lens mount method. To operate, loosen the H back focus fastening screw by turning it in the anti-clockwise direction, and turn the screw in the clockwise direction to fasten after operation is complete. This product is pre-adjusted to a position that is best suited for CS mount. (A Page 20) B Lens Mount This is a mount for mounting the lens. The mount is compatible with CS mount lens and C mount lens. (A Page 13) C Camera Mounting Bracket Fastening Screw (2 pcs: M2.6 x 6 mm) Use screws with a length of 6 mm. Screws beyond the specified length must not be used as doing so may damage the interior. D Anti-rotation Hole Use this anti-rotation hole to mount the camera firmly. E Camera Mounting Screw Holes (1/4-20UNC) Use this hole when mounting this product to a fixer or rotating platform. Use screws with a length between 5 mm to 7 mm. Screws beyond the specified length may damage the interior, while those shorter than specified may cause the camera to fall off, and therefore these must not be used. (A Page 18) F [MAC address] LED Indicator The MAC address is a unique physical address of the product. This address cannot be altered. G Camera Mounting Bracket This bracket is pre-mounted to the bottom surface of the camera. It can also be mounted to the top surface according to the usage. Mount it to the screw holes at the bottom surface using the C camera mounting bracket fastening screws. (A Page 18) H [BF LOCK] Back Focus Fastening Screw This is the fastening screw for the back focus adjustment unit. (A Page 20) I Inner Tripod Base Screw Hole (1/4-20UNC) Use this hole when mounting this product to a miniature housing. You can mount to the housing through this hole directly without using the G camera mounting bracket. (A Page 19) 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
9
Front / Bottom / Side
A
Back Focus Adjustment Ring
This ring is used for back focus adjustment and
switching the lens mount method.
To operate, loosen the
H
back focus fastening
screw by turning it in the anti-clockwise direction,
and turn the screw in the clockwise direction to
fasten after operation is complete.
This product is pre-adjusted to a position that is
best suited for CS mount.
(
A
Page 20)
B
Lens Mount
This is a mount for mounting the lens.
The mount is compatible with CS mount lens
and C mount lens.
(
A
Page 13)
C
Camera Mounting Bracket Fastening
Screw (2 pcs: M2.6 x 6 mm)
Use screws with a length of 6 mm. Screws
beyond the specified length must not be used as
doing so may damage the interior.
D
Anti-rotation Hole
Use this anti-rotation hole to mount the camera
firmly.
E
Camera Mounting Screw Holes
(1/4-20UNC)
Use this hole when mounting this product to a
fixer or rotating platform.
Use screws with a length between 5 mm to
7 mm. Screws beyond the specified length may
damage the interior, while those shorter than
specified may cause the camera to fall off, and
therefore these must not be used.
(
A
Page 18)
F
[MAC address] LED Indicator
The MAC address is a unique physical address
of the product. This address cannot be altered.
G
Camera Mounting Bracket
This bracket is pre-mounted to the bottom
surface of the camera. It can also be mounted to
the top surface according to the usage. Mount it
to the screw holes at the bottom surface using
the
C
camera mounting bracket fastening
screws.
(
A
Page 18)
H
[BF LOCK] Back Focus Fastening Screw
This is the fastening screw for the back focus
adjustment unit.
(
A
Page 20)
I
Inner Tripod Base Screw Hole (1/4-20UNC)
Use this hole when mounting this product to a
miniature housing.
You can mount to the housing through this hole
directly without using the
G
camera mounting
bracket.
(
A
Page 19)
Name and Function of Parts
B
D
E
C
H
F
I
A
G